How to Assemble the SOQI Bed

The following Videos will help you assemble your new SOQI bed.

YouTube Preview Image

Introduction to the SOQI Bed assembly


SOQI Installation Steps


YouTube Preview Image

Step 1

From ITEM 1: Bolt the 2 parts of the table together with 4 long bolts (M12x205) and 4 nuts.


YouTube Preview Image

Step 2

From package 2: Bolt each LEG to the underside of the table with 4 bolts (M10x50), 4 lock and 4 flat washers.


YouTube Preview Image

Step 3

From package 3: Bolt mesh platform between the 2 legs of the underside of the table with 4 bolts (M10x50) , 4 lock and 4 flat washers.


YouTube Preview Image

Step 4

From package 4: Bolt CD player Control Box to the underside of the table with 4 'L' brackets using 8 bolts (M4x9) , 8 lock and 8 flat washers.


YouTube Preview Image

Step 5

Turn the bed UPRIGHT at this point


YouTube Preview Image

Step 6

From package 5: Bolt the 2 END support saddles each with 4 bolts (M4x12). Slide 3 plastic Dome brackets on each rod. Place each rod into an END support saddle. Slide the other end of each rod into the CENTER support saddle and bolt with 4 bolts (M4x9) from package 6.


YouTube Preview Image

Step 7

Install mattress at this point


YouTube Preview Image

Step 8

From package 7: Bolt the SHORT handle to the head of the bed using 4 bolts (1/4"x35) , 4 lock and 4 flat washers.


YouTube Preview Image

Step 9

From package 7: Bolt the LONG handle to the SIDE of the bed using 4 bolts (1/4"x35) , 4 lock and 4 flat washers.


YouTube Preview Image

Step 10

From package 8: Bolt the CONTROL PANEL to the SIDE of the bed (near the head) using 4 bolts (1/4"x13), 4 lock and 4 flat washers.


YouTube Preview Image

Step 11

Install each Dome into a pair of receiving brackets. Set Chi machine at the foot of the bed. Plug 3 Domes, Chi, Control Panel and 2 speakers into the back of the Control Box.

We want to serve you better, Your suggestions are valued: